Nick Gibson from Santini (Pronet) shows us a few of the latest and greatest bib shorts and jerseys.

website: http://pronetcycling.com/

RoadBikeReview and Mtbr had a chance to chat and interview Sean Walling of Soulcraft (Petaluma, CA). Unfortunately the video interview we did got hit by gremlins and turned out too poorly to post. We did, however, salvage some studio photos of a couple of his bikes.

This is the Soulcraft steel cross bike - The Dirt Bomb.
Features
» Custom fit
» “Selectron” rider specific custom tubeset
» Sloping top tube
» Reinforced seat collar insert
» DKG removable seat clamp (with QR Option)
» Externally butted head tube
» Gusseted head tube/downtube junction
» Internally relieved BB shell
» Sealed tubeset (no vent holes)
» Available with Soulcraft unicrown straight blade fork
» Top tube routing with roller on back of seat tube for use with road front derailleurs
» 35c tire clearance
» Standard road crank (39/53) compatibility
» Singlespeed option

For photos of the Soulcraft 29er singlespeed hardtail mountain bike (Holy Roller), check out the NAHBS coverage on our sister site: Mtbr.com.

website: http://www.soulcraftbikes.com/

(note: the customers name and bike serial number were digitally removed for privacy)

Portland turned out to be an excellent host city for the Handmade Show.

We flew in to Portland from LAX first thing Saturday morning, walked out the airport doors and stepped on to the waiting Max lightrail. A quick 40 minute train ride costing only $2 and we were dropped off at the Convention Center, home of the Handmade Show for the weekend. The glaring differences in the two cities’ mass transit infrastructures were already smacking us in the face. Portland had just provided the first of several pleasant surprises to these jaded out of towners.

On to the show! Our first stop was to check in with the Roadbikereview / MTBR booth. Francis, Gregg and new-guy Thien were already cranking, bringing some of the custom bikes into their booth for photo coverage, as well as bringing the builders themselves in for personal one-on-one interviews on video.

At first glance the venue looks fairly small. Much smaller than Interbike in fact and you assume, falsely, that you can see the entire show in a couple of hours. Its not until you’ve seen the work of only two builders in an hour that you realize its going to be a much longer day that anticipated. At the Handmade show, the amount of “filler” exhibits is almost non-existent. That is, there are hardly any booths that you pass by from lack of interest. Everything warrants stopping. Whether its something that halts you in your tracks such as a frame made of wood, or maybe its a small crafted detail that registers in your subconscious as you pass by and makes you stop and backtrack to determine what it was that you think you just saw. In most cases you’re left gawking at some cleverly designed detail. A lugged stem, a unique fork, a pump peg, a dropout. Or something radical like a drivetrain-mounted disc brake from California’s Sycip.

Or a custom made stem face plate from Colorado’s Moots that doubles as headlight mount.

NAHBS is a show about detail. You will waste your day by observing bikes solely as a whole machine. Yes you will see beautiful bicycles, but overlook the fine details and you will have missed the creative nuances that set the framebuilders apart.

Hammered & polished lugs from Florida’s Villin Cycle Works.

Double chain stays from Portland’s own Ahearne Cycles.

*******

Beer Break

Time to take 5 and sit down with a cold one to process everything that has been in our faces so far; far too many amazing bikes, gracious and approachable framebuilders, celeb sightings such as Lance Armstrong and Robin Williams - both cruising the booths along with everyone else, and getting a peek at cool production components like the new Shimano 29er mtb wheelset.

Also scattered about the show were creative bits like this belt buckle from White Industries, designed for you to mount your favorite cog or freewheel to, cowboy.

Also spied at the White Ind. table was their swanky new set of track hubs. Note the splined cog/hub interface.

We checked back in with the RBR guys and as usual they were still hustling builders into their ad-hoc studio, seen here with the guys from Austin’s True Fabrication.

detail of faux pitting and rust on a new True Fab mountain frame

We were officially overwhelmed. We had met Richard Sachs, Jeff Jones and Dario Pegoretti. We had left our fingerprints on countless glossy tubes. We had snapped camera shutters and popped flashes until batteries ran dead. It was time to go.

Portland now offered us a spectacular range of options for nightlife and we dove right in. Getting around town was once again a piece of cake. Walking, riding or taking the Max (free in the Business district!). There are bicycles everywhere in town. Weather be damned, these people are riding. Several places we hit after the show, all withing walking/biking distance were the Rogue Brew House for beer, the Yamhill Pub and Plan B for more beer and another Lance sighting, Clyde Common for dinner and Voodoo Donuts for dessert. We eventually crashed at the uber-hip Ace Hotel, drifting off to sleep while trying to remember which builders were going to be a must-see on Sunday.

Sunday morning brought a hot shower, recharged camera batteries and a hot cup of Portland’s Stumptown Coffee. We caught the Max and were off to the show in no time.

Curtlo-built commuter frame at the Rohloff booth, utilizing a belt-driven drivetrain. Note the single S&S coupler used to separate the chainstay for belt installation and removal.

Custom-molded-to-your-butt carbon fiber saddles offered by California framebuilder Ybarrola.

A make-shift shrine to our recently lost comrade Sheldon Brown.

We took several more laps of the venue, catching things we had overlooked the day prior and re-appreciating things we had already stared at and smiled. We left the show with enough time left in the day to visit River City Cycles, home of the handmade Full Wood wooden bicycle fenders. What a beautiful shop!

Next up was lunch and beer at Lucky Labrador Brewing and catching the amazing bicycle photography exhibit put on by Rapha clothing and Rouleur Magazine.

It was a short weekend, jam packed with goodness. The weather was kind to us. Our luggage was stuffed with brochures, business cards, pint glasses, decals, clothing and other miscellaneous swag. And our bank accounts were given reprieve from what could have been a disastrous weekend for our financial stability. There were plenty of opportunities to justify the need for “just one more” bicycle in the stable.

Thank you Portland! See you all next year in Indianapolis.

We chatted with Tom Milton of Selle Anatomica saddles and he showed us his interesting array of products.

Their main product is the Titanico LD saddle for $175. The leather is very soft and very waterproof. The distinctive feature is a cut-out in the leather that optimizes comfort by through better understanding of the human anatomy.

The saddle has many fans among the mtbr and roadbikereview users. Many manufacturers as well sing its praises. Another advantage is no break-in time required unlike the popular Brooks saddles.

The saddles are reinforced with a laminate for strength and durability.

(more…)

Darrell McCulloch from Llewellyn Custom Cycles (Brisbane, Australia) shows us this lugged steel road bike with his own lug work. Darrell also explains some of the philosophies that he believes in, when he builds a custom bicycle.

website: www.llewellynbikes.com

Here, Darrell shows us his Mini6, a steel fixie with his lugs. From his website: “These lugs are the world’s first and only sloping top tube lugs for standard OS tubes.”

website: http://www.llewellynbikes.com/

Cody, Clark, and Cole from True Fabrication Bicycles (Austin, TX) shows us this custom womens fixie commuter with a nice rack (wood inlay with a flower), too.

website: http://www.truefabricationbicycles.com/

Josh Muir from Frances Cycles (Santa Cruz, CA) shows us this unique cargo bike with remote front steering.

website: http://www.francescycles.com/

Josh Muir from Frances Cycles (Santa Cruz, CA) shows us this diffusable steel track bike with stainless highlights.

website: http://www.francescycles.com/

Tina from Brooks gives us the info on a couple of new products from Brooks, Leather Grips and a new Messenger Bag.

website: http://www.brookssaddles.com/